Concrete Polishing Technology

2017-12-26

Concrete polishing technology: Let your ground farewell break from damaged and peeling  phenomenon.

Most of the ground now is basically concrete, bare concrete surface is not beautiful, the use of a period of time there will be varying degrees of damage, people in order to increase its life, in its appearance covered with a coat, but This few millimeters thick coat can only increase short life, latter part of the maintenance and repair will increase the cost of the business, the ground  is Not ideal for business.

As a new technology, concrete polishing technology can perfectly solve these problems. It is not to brush the concrete surface with a layer of coating to protect the ground, but through the concrete silicon carbide hardener and cement internal reaction to enhance the performance of concrete so that the ground is no longer appear dust from the sand damage problem.

The principle of the concrete polishing technique is to make the calcium ions in the concrete become firm by reaction of, the silicon content in the concrete silicon crystal hardening agent and the free calcium ions in the concrete, to increase the hardness and the abrasion resistance of the concrete so that the hardness of the concrete can reach Mohs 8,  because the concrete silicon carbide hardener will completely penetrate into the cement, so it will not increase the thickness of the concrete itself. It can live as long as a building, do not worry about the issue of late maintenance.

Concrete construction process:

1. First with 60 # metal  grinding discs initial grinding the concrete ground that has been maintenance (Old and new ground can be), remove the mud floating layer. (If the ground strength is not good, you can first use silicon hardening agent to enhance the hardness and then grinding)

2. On the ground that has been initial grinding, spilled and scribble concrete silicon carbide hardener, push evenly open.

3. After using concrete silicon crystal hardener 4 hours, followed by 50 #, 150 #, 300 #, 500 # diamond resin grinding pads to fine grinding.

4. Spilled and scribble concrete silicon carbide hardener again, so that the ground becomes more strong and Wear-resistant.

5. After the concrete silicon carbide hardener  dry , using high-speed polishing machine with a diamond polishing pad polishing.