The Maintenance Methods of Diamond Wet Polishing Pads

2018-01-03

If not immediately used diamond wet polishing pads, it should be placed flat or hang them through the hole, flat placed diamond wet polishing pads can not be stacked with other items or foot stand on it, and pay attention to moisture, rust-proof.  

When the diamond wet polishing pad is no longer sharp, rough cutting surface, it must be promptly re-grinding. re-grinding can not change the original angle, and destroy the dynamic balance.

Diamond wet polishing pad's diameter correction, positioning hole processing, etc., must be carried out by the factory. If the processing is not good, will affect the use effect of the product, and it may happen dangerous, In principle reaming can not exceed the original aperture of 20mm, so as not to affect the balance of stress.

Regular cleaning and cleaning diamond wet polishing pads, ensure the diamond wet pads normal cleaning is also very beneficial to clean gravel.

Be sure to use a relatively high-quality sealant to seal the diamond wet polishing pads, because the seal will be more conducive to maintain the natural appearance of the diamond wet polishing pads, but also effectively improve the surface of the phenomenon of dark light, but also play an appropriate Anti-fouling ability.