The Difference of Diamond Blade and Diamond Polishing Pad

2017-12-25

Diamond saw blade is a cutting tool, widely used in concrete, refractory materials, stone, ceramics and other hard and brittle materials processing. Diamond saw blade is mainly composed of two parts: base body  and knife head. The base body  is the main supporting part of bonding blade head, while the blade head is the cutting part during use. The blade will be continuously  consumed while in use, while the base body will not..The cutter head can be cut The role is because it contains diamond, diamond as the hardest material at present, it friction in the cutter head cutting the object.. While the diamond particles are wrapped by the metal inside the cutter head.

1, sintered diamond saw blade: sub-cold pressure sintering and hot-pressed sintering two, they are made by pressed sintered.

2, welding diamond saw blade: sub-brazing and laser welding two, brazing is through high temperature melting medium will be welded together with the cutter head and base body, such as high-frequency induction brazing saw blades, vacuum brazing saw blades, etc .; Laser welding through the high temperature laser melting the edge of base body and cutter head form a metallurgical bond.

3, electroplating (brazing) diamond saw blade: With the cutter head powder attached to the base body by electroplating method. Beginning in 2012, the state gradually canceled the production of electroplated diamond products, mainly because of the serious pollution.

The main features of diamond grinding pads are:

1. Mainly used for polishing granite, marble and other special-shaped stone edge corners, inner arc, outer arc;

2 good sharp degree, quick grinding speed, fast glazing, high brightness;

3. Good wear resistance, long service life, high overall cost performance;

4. When using portable polishing machine, avoid motor speed is not greater than 4500 rev / min; the maximum pressure in 3kgs / cm2 above;

5. The best choice of different colors of stone similar color soft (water) grinding;

6. Particle size (or mesh) 30 # 50 # 100 # 150 # 200 # 300 # 400 # 500 # 800 # 1000 # 1500 # 2000 # 3000 # and BUFF Different granularity is distinguished by different colors.